Home › Articles › Corsair builds a 12V-2x6 cable with six switches to simulate GPU power pin failures
Corsair builds a 12V-2x6 cable with six switches to simulate GPU power pin failures
Corsair uses a modified cable, with a switch for each of the six 12 V pins, to test the PinProtect protection systems of its power supplies. Spanish site Profesional Review put it to the test with an RTX 5080.

Corsair has built a modified 12V-2x6 cable that lets the six positive 12 V pins be disconnected one by one through a box with six switches. It is used to check PinProtect and PinProtect+, the systems in its power supplies that monitor how current is distributed across the pins of the graphics card connector, the weak point behind the melted connector cases of recent years. The cable is not a retail product.
In Profesional Review's test, with a GeForce RTX 5080 drawing about 250 W, the RM1200e Gen 2 power supply with PinProtect cut power to the card after five of the six pins were disconnected. The HX1000i SHIFT CRYSTAL with PinProtect+, which measures current pin by pin through the iCUE software, flagged that the 9.5 A threshold had been exceeded when only two pins were left active and shut off power to the GPU after 30 seconds.
Sources: Profesional Review, test of 13 November 2026; VideoCardz (14 November 2026). Text by Statcade.





